developer:soap-1.4:methods:runcheckcredit

Soap API v1.4

runCheckCredit

Run a check credit transaction.

Description

This method uses ACH to sends funds to a customer, employee, vendor, etc. It can be used to “refund” a sale or make a payment to someone (ie payroll). This transaction type is “stand alone” and does not pull the account and routing number from a previous sale. You must provide the Routing and Account properties in the CheckData object. If you want to use the account data from a prior transaction by referencing the RefNum, use the refundTransaction or runQuickCredit methods.

This feature, sometimes referred as “Reverse ACH”, “Check Credit” or “Disbursement”, is not available with all check processors. For those processors that do support it, merchants must request that it is enabled for their account. Contact your merchant service provider for further information.

If this method is used to reverse or refund an electronic check transaction, please be aware that both the original transaction and the refund will appear as separate transactions on the customer's bank account statement. To reverse a sale without creating a new transaction, you must use the voidTransaction method. Please see the description of the voidTransaction method for more details on how to determine which of these methods is most appropriate.

See also runCheckSale, runQuickCredit, voidTransaction, refundTransaction

Syntax

Arguments

Type Name Description
ueSecurityToken Token Merchant security token: used to identify merchant and validate transaction.
TransactionRequestObject Params Request transaction details from all fields of the transaction form, including reference number, transaction amount, customer ID, currency, authorization code, and any other information entered at the time of the transaction.

Return Value

TransactionResponse Returns a TransactionResponse object containing the results of the transaction and all relevant data.

Examples

PHP

For directions on how to set up the WSDL link, create “$token” and “$client”, go to SOAP PHP How-to.

<?php
 
try {
 
  $Request=array(
    'AccountHolder' => 'Tester Jones',
    'Details' => array(
      'Description' => 'Example Transaction',
      'Amount' => '4.99',
      'Invoice' => '44539'
      ),
    'CheckData' => array(
      'CheckNumber' => '1234',
      'Routing' => '123456789',
      'Account' => '11111111',
      'AccountType' => 'Savings',
      'DriversLicense' => '34521343',
      'DriversLicenseState' => 'CA',
      'RecordType' => 'PPD'
      )
    );
 
  $res=$client->runCheckCredit($token, $Request);
 
}  
 
catch (SoapFault $e)  {
  echo $client->__getLastRequest();
  echo $client->__getLastResponse();
  die("runCheckCredit failed :" .$e->getMessage());
  }
 
?> 

Java

This example uses the USAePay Java library. For directions on how to install the library and create the token/client objects, go to either the Java JAX-RPC Howto or the Java JAX-WS Howto.

try {
 
  TransactionRequestObject params = new TransactionRequestObject();
 
  //set account holder name
    params.setAccountHolder("Test Joe");
 
    // populate transaction details
    TransactionDetail details = new TransactionDetail();
      details.setAmount(22.34);
      details.setDescription("My Test Sale");
      details.setInvoice("119891");
    params.setDetails(details);
 
    // populate credit card data
    CheckData checkdata = new CheckData();
      checkdata.setRouting("123123123");
      checkdata.setAccount("321321");
    params.setCheckData(checkdata);
 
 
  // Create request object
  RunCheckCredit request = new RunCheckCredit();
    request.setToken(token);
    request.setParams(params);
 
  // Create response object
  TransactionResponse response;
 
  // run credit
  response = client.runCheckCredit(token, params);
 
  System.out.println("Response: " + response.getResult() + " RefNum: " + response.getRefNum());
} catch (Exception e) {
    System.out.println("Soap Exception: " + e.getMessage());
}

Visual Basic (.Net)

For directions on how to set up the WSDL link, create “token” and “client”, go to Visual Basic .Net Soap How-to.

        Dim client As usaepay.usaepayService = New usaepay.usaepayService
        Dim token As usaepay.ueSecurityToken
 
        token = Me.CreateToken("714SSUxv1uohng2XkMJ7kLpETsu58G66", "1234")
 
 
        Dim transaction As usaepay.TransactionRequestObject = New usaepay.TransactionRequestObject
 
        transaction.CheckData = New usaepay.CheckData
        transaction.CheckData.Account = "1112223333"
        transaction.CheckData.Routing = "123456789"
        transaction.CheckData.DriversLicense = "D5555555"
        transaction.CheckData.DriversLicenseState = "CA"
 
        transaction.Details = New usaepay.TransactionDetail
        transaction.Details.Amount = "1.00"
        transaction.Details.AmountSpecified = True
        transaction.Details.Invoice = "55555"
        transaction.Details.Description = "Test Check Sale"
 
        transaction.AccountHolder = "Test Guy"
 
        Dim response As usaepay.TransactionResponse
 
        response = client.runCheckCredit(token, transaction)
 
        If response.ResultCode = "A" Then
            MsgBox("Transaction Approved, Reference Number: " & response.RefNum)
        ElseIf response.ResultCode = "D" Then
            MsgBox("Transaction Declined, Reason: " & response.Error)
        Else
            MsgBox("Transaction Error, Reason: " & response.Error)
        End If

.NET C#

For directions on how to set up the WSDL link and create the “token” and “client” variables, go to the C Sharp .Net Soap How-to.

usaepay.TransactionRequestObject tran = new usaepay.TransactionRequestObject();
 
            tran.Details = new usaepay.TransactionDetail();
            tran.Details.Amount = 1.00;
            tran.Details.AmountSpecified = true;
            tran.Details.Invoice = "1234";
            tran.Details.Description = "Sample Check Credit";
 
            tran.CheckData = new usaepay.CheckData();
            tran.CheckData.Account = "1112223333";
            tran.CheckData.Routing = "123456789";
            tran.CheckData.DriversLicense = "D5555555";
            tran.CheckData.DriversLicenseState = "CA";
 
            tran.AccountHolder = "Test Guy";
 
            usaepay.TransactionResponse response = new usaepay.TransactionResponse();
 
            try
            {
                response = client.runCheckCredit(token, tran);
 
                if (response.ResultCode == "A")
                {
                    MessageBox.Show(string.Concat("Transaction Approved, RefNum: ",
                    response.RefNum));
                }
                else
                {
                    MessageBox.Show(string.Concat("Transaction Failed: ",
                    response.Error));
                }
            }
            catch (Exception err)
            {
                MessageBox.Show(err.Message);
 
            }

XML

<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="urn:usaepay"
 xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
 xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"
 SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<SOAP-ENV:Body>
<ns1:runCheckCredit>
<Token xsi:type="ns1:ueSecurityToken">
<ClientIP xsi:type="xsd:string">192.168.0.1</ClientIP>
<PinHash xsi:type="ns1:ueHash">
<HashValue xsi:type="xsd:string">11ac55b0a0b59f8f028dbf85bc32266fa973dd0e</HashValue>
<Seed xsi:type="xsd:string">12678150211876663375</Seed>
<Type xsi:type="xsd:string">sha1</Type>
</PinHash>
<SourceKey xsi:type="xsd:string">HB4P7C4K2w2ZCQQQXRqrxDj6agrS2NIT</SourceKey>
</Token>
<Params xsi:type="ns1:TransactionRequestObject">
	<AccountHolder xsi:type="xsd:string">Tester Jones 111</AccountHolder>
	<CheckData xsi:type="ns1:CheckData">
		<Account xsi:type="xsd:string">11111111</Account>
		<AccountType xsi:type="xsd:string">Savings</AccountType>
		<CheckNumber xsi:type="xsd:integer">1234</CheckNumber>
		<DriversLicense xsi:type="xsd:string">34521343</DriversLicense>
		<DriversLicenseState xsi:type="xsd:string">CA</DriversLicenseState>
		<RecordType xsi:type="xsd:string">PPD</RecordType>
		<Routing xsi:type="xsd:string">123456789</Routing>
	</CheckData>
	<Details xsi:type="ns1:TransactionDetail">
		<Amount xsi:type="xsd:double">4.99</Amount>
		<Description xsi:type="xsd:string">Example Credit</Description>
		<Invoice xsi:type="xsd:string">44539</Invoice>
	</Details>
</Params>
</ns1:runCheckCredit>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>

Change History

Version Change
1.0 Method added in soap v1.0
developer/soap-1.4/methods/runcheckcredit.txt · Last modified: 2011/06/23 08:39 by tem

Page Tools